Manual clamp for strip holding and tensioning

• 
• 
• 
• 
  How to use the rubber clamp

This manual clamp is designed for removal of rubber / PVC or PU coverings which are glued or vulcanized to different surfaces like metal, rubber or fabric. This clamping tool is a quality product and is tested to a weight of 200 kg.

Do not use any additional leverage tools such as crew bars or other. This will overload the clamp and damage it.

It provides the best leverage-power for the user as well as hand protection. Handling is quite simple:

1. 1. Cut the rubber (PVC or PE) surface in small strips up to 100 mm width;
2. 2. Bring up the rubber at one point a little and place the clamp in position;
3. 3. When the clamp is pulled, it closes automatically.